IBASE

RISCプラットフォーム

RP-102-SMC

Carrier Board for SMARC™ Modules

For SMARC V1.0 modulesSupports 19V DC-in, reset, power, RTC functionSupports Gigabit LAN, audio, USB OTG, HDMI, COM (RS232/422/485)With Micro SD socket, Mini PCI-E with USB, SIM socket on boardSupports 2x isolated CAN transceiver, TTL, LVDS, HDMI, MIPI-CSI camera
概要
Form Factor Carrier Board
Compliant with SMARC™ V1.0
Edge I/O 1x DC-in Jack (12V)
1x RJ45 GbE LAN
1x Mic+Headphone
2x USB 2.0 host
1x USB OTG
1x HDMI
1x COM (RS232/422/485)
Internal Headers / Connectors 2x CAN bus 2.0B
1x 18/24-bit single CH LVDS
1x 18/24-bit TTL box header
1x LCD DDC (I²C)
1x LCD backlight connector
1x CSI-MIPI
2x USB 2.0 host
8x GPIO pin header
2x RS232 box header
1x SIM socket
1x SPDIF
1x Speaker box header
1x Micro-SD socket
2x I²C
1x SATA II
1x Full-size Mini PCI-E with USB interface
Jumpers, Switch & Buttons 1x Boot media select switch (SD/eMMC)
1x Reset button
1x Power button
1x GPI button
1x RS232/422/485 (by jumper selection)
1x Backlight power jumper
Power Input 19V DC-in
Dimensions 170mm x 170mm (6.7” x 6.7”)
Environment Humidity: 0% to 90% RH at 60° C (non-condensing)
Vibration: Non-operating, 3Hz to 500Hz, 15mins
Operating Temperature -40° C to +85° C (-40°F~184°F)
OS Support Depending on the CPU module
Certification CE/FCC Class A
RP-102-SMC RISC Carrier Board for SMARC V1.0 modules,12V DC-in, Mini-ITX 170mmx170mm, 2x CAN, Mini PCI-E with USB, Resistive touch header (4-wire), 2x USB header,1x I²C header, 18/24-bit LVDS,TTL connector, Line in/ Line out, EEROM, CSI MIPI bus, 8x GPIO, 2x RS232,1x RS232/422/485, VDDIO=3.3V
製品のデータシート
RP-102-SMC
説明書
Carrier board schematic

関連製品