Specification
| Form Factor | 2.5-inch Disk-Size SBC |
| CPU | NXP Cortex™-A9 i.MX 6Dual-Lite 1GHz |
| System Memory | 1GB DDR3 on board |
| Data Memory | 4GB eMMC on board |
| Display | 1x 18/24-bit single LVDS, up to 1366 x 768 1x HDMI V1.4, up to 1080P30 at 60Hz |
| Video Codec | Encoder: MPEG-4 SP, H.264 BP, H.263, MJPEG BP Decoder: MPEG-4 ASP, H.264 HP, MPEG-2 MP, MJPEG BP |
| LAN | 10/100/1000 Mbps |
| Touch | USB headers |
| Audio | 2x 5-pin header,1.0mm (1x line-in, 1x line-out) |
| RTC | IDT 1337AGDVGI8 |
| Watchdog | 256 levels, 0~128 secs |
| Edge I/O | 1x GbE (RJ45 connector) 1x USB Type-A,1x USB OTG Mini-USB 1x HDMI 1x RS232/422/485 (D-SUB 9 male connector) 1x Micro SD socket (UHS-I SDR-104, max.104MB/s) 1x Reset button |
| Header, Expansion & LEDs | 1x LVDS connector (Hirose DF13-20) 1x Backlight, 3.3V/1A, 5V/1A, 12/1A (jumper selection) 1x 4-pin wafer (for debug console port) 1x Audio pin header (Line-in and Line-out) 2x 2-wire UART (1x6 pin header,1.0mm) 2x USB 2.0 (2*5 pin header 1.0mm) 1x M.2 Key-E (2230) w/ PCI-E, USB, SDIO, UART 8x GPIO (2*5 pin header 1.0mm) 2x Green LEDs (for Power On/Off, and Wireless status) |
| Dimensions | 100mm x 72mm (3.94” x 2.83”) |
| Power | 12V DC-in (DC-jack) |
| Operating Temperature | -40°C ~85°C (-40°F ~ 185°F) with heatsink |
| Devices | WiFi/BT modul (option) |
| Software Support | Yocto 2.1 (Kernel 4.1.15) Android 6.0.1 |
| Relative Humidity | 10%~90% (non-condensing) |
| Certification | CE/ FCC Class B |
| IBR115 | 2.5” ARM-based SBC, NXP Cortex™-A9, i.MX 6Dual-Lite 1GHz, 1GB DDR, 4GB eMMC, Single LVDS, HDMI, RS-234/422/485, USB, M.2 Key E(2230) |
| Heatsink | HSIBR115-A |
| Cable | LCD403, Panel cable for 7” LCD404, Panel cable for 15” IVT-76, Backlight for 7” and 15” panel PK1-135, GPIO PK1-133, COM port USB-81, USB OTG cable PK1-100A, Debug cable |
| RF module | WNFT-234ACN, WiFi/BT M.2 module |
| Display | AM-1024600ATMQW-A0H: - 7” Capacitive LVDS TFT LCD, 1024 x 600 M150GNN2 R1: - 15” Capacitive LVDS TFT LCD, 1024 x 768 |
RELATED PRODUCTS
