- Supports Pentium® M / Celeron® M processors, up to 2.26GHz, 400MHz/533MHz FSB
- 1x DDR2 DIMM, Max. 1GB
- Onboard 10/100BaseT and optional Marvell PCI-E Gigabit LAN
- Integrated Intel® 915GME VGA for CRT,18-bit dual channel LVDS
- 2x SATA, 6x USB 2.0, 2x COM, Watchdog timer
- Optional 1394/CF socket, optional single/dual DVI card, 1x PCI, 1x Mini PCI, 1x PCI-E(1) slots
CPU Socket
Socket 479
CPU
Supports Intel® Pentium® M, Celeron® M
Up to 2.26GHz
CPU Front Side Bus ( FSB )
400MHz / 533MHz
Chipset
Intel®915GME chipset
ICH6M
BIOS
Award BIOS, ACPI supported
System Memory
1X DDR2 DIMM, Max. 1GB
Integrated VGA
Intel® 915GME integrated VGA for CRT/LVDS
Supports DVMT 3.0 for memory allocation
LVDS
Intel® 915GME integrated for 18-bit dual channel LVDS
VGA Options
Optional ID391 DVI card with Chrontel 7307 controller
Primary LAN
ICH6M integrated 10/100 BaseT Ethernet
Secondary LAN
Marvell 88E8053 PCI-E Gigabit Ethernet
Audio
ICH6M integrated audio with AC97 codec
Onboard NS LM4950 amplifier
Multi I/O
ICH6M, Winbond W83627HF chipset
Supports 1x IDE, 2x SATA, 2x RS-232, 1x FDD, 1x KB,
1x Mouse
IDE Interface
Built in ICH6M; One enhanced IDE channel supports
2 IDE devices; supports UDMA33/66/100
FDD Interface
Onboard slim FDD connector
Serial Ports
Two RS-232 ports
Serial ATA
Supports 2 ports
USB (2.0)
Supports 6 USB ports (4 ports + 2 ports via pin header)
IrDA
Pin header
Keyboard and Mouse Connector
PS/2 type
Watchdog Timer
Generates system reset; 256 levels
Hardware Monitoring
Built in W83627HF; monitors system/CPU
temperature and voltage status
Digital I/O
4 in / 4 out
Edge Connectors
VGA CRT, PS/2 KB/Mouse Mini DIN, two RJ-45, 1394, SPDIF, four USB
Onboard Connectors/Headers
ATX power, COM2, Digital I/O, slim FDD, IrDA, USB5/6, IDE1, CF socket, 2x SATA, FAN1/2, LAN Wakeup, LVDS1/2,, CD-In, Speaker, SDVO
Form Factor
Mini-ITX Motherboard
Dimensions
170mm x 170mm
Power Consumption
Intel® Pentium® M 1.4GHz w/ 1GB DDR2
+5V: 1.32A
+12V: 1.52A
Rear Connectors
Operating Temperature
0°C~60°C (32°F~140°F)
Storage Temperature
-20°C~80°C (-4°F~176°F)
Relative Humidity
10%~90% (non-condensing)
| MB896H |
Socket 479 915GMEE Mini-ITX motherboard w/ VGA and 10/100 LAN |
| MB896HF |
Socket 479 915GMEE Mini-ITX motherboard w/ VGA, 10/100 and Gigabit LAN, 1394, CF |
| MB896EL |
Socket 479 915GMEE Mini-ITX motherboard w/ VGA, 10/100 and Gigabit LAN, 1394, CF |
| ID390B-R |
24-bit LVDS board |
| ID390C-R |
CRT board |
| ID391-R |
Single DVI board w/ cable |
| ID391D-R |
Dual DVI board w/ cable |
| ID392-R |
Single DVI board w/ edge connector |
| ID392D-R |
Dual DVI board w/ edge connector |
| ID450-R |
Power interface board |
| IP115 |
Riser card with 1x PCI |
| IP151-R |
Riser card with 2x PCI |
| IP340 |
Riser card with 2x PCI |
| IP450-R |
Riser card with 2x PCI |
| CMI200-60 |
Chassis for Mini-ITX (low power), w/ 60W PSU, 2.5” HDD holder |
| CMI200-85 |
Chassis for Mini-ITX (low power), w/ 85W PSU, 2.5” HDD holder |
| CMI201-60 |
Chassis for Mini-ITX (low power), w/ 60W PSU, 2.5” HDD holder, 1x PCI-E (optional IP271-R, IP119-R riser & LVDS/DVI ports) |
| CMI201-85 |
Chassis for Mini-ITX (low power), w/ 85W PSU, 2.5” HDD holder, 1x PCI-E (optional IP271-R, IP119-R riser & LVDS/DVI ports) |
| CMI203-180 |
Chassis for Mini-ITX, w/ 180W PSU, 3.5” HDD holder, 2x PCI-E (optional IP241, IP118-R riser card & iIO LCM) |
| CMI203-250 |
Chassis for Mini-ITX, w/ 250W PSU, 3.5” HDD holder, 2x PCI-E (optional IP241, IP118-R riser card & iIO LCM) |
Remarks:* Specifications are subject to change without prior notice. |
